Fig.7
Insert cant beam (F)
into cant beam down tube
(I).
Fig.9
Attach cant beam down tube (I) to
cant beam down connector (L) by screw
(EE), washer (BB) and nut (DD)
.
Fig.8
Insert the other end of
cant beam (F) into big top
connector (J).
Fig.10
Attach small cant
beam (K) into small top
connector (N).
Fig.11
Put small canopy (T)
onto the small top and
attach four corners of
small canopy to small top
cant beam (K).
Fig.13
Put the big canopy
(U) onto big top and do
not spread out. Then
insert the assembled
small top into big top
arch beam (F) through
small top arch beam (K).
Fig.12
Attach the finial
(O) to small top
connector (N).
Hardware Pack 3
GG
Plas
tic
ring
104 PCS
HH
Stake
￠
6X230
12 PCS
