Fig.4:
Insert the Oblique Beam (F) into Bottom Oblique Beam (J1&J2)
Fig.5:
Insert the Big Roof Connector (K) into another side of the Oblique Beam (F)
Fig.6:
Insert the assembled Bottom Oblique Beam (J1&J2) into the Corner Panel (A)
Fig.7:
Insert the Middle Beam
（
G1&G2
）
into the Bottom Middle Beam (H&I)
Hardware Pack 2
Fig.8:
Insert the Long Middle Beam (G1) and Short Middle Beam (G2) into the big Roof Connector (K),
attached the Hook (L) on the big Roof Connector (K)
Fig.9:
Insert the assembled bottom middle beams (H&I) into the Cross Beam (E&C), tighten with Knob (S),
place the Big Canopy (P) to the roof, do not spread it.
Fig.10:
Insert the Small Roof Oblique Beam (M) into the Small Roof Connector (N)
Fig.11:
Attach Small Canopy (Q) to the small roof along the Small Roof Oblique Beam (M), aligning the corners
and stretching it to fit.
Fig.12:
Insert the Small Roof Oblique Beam (M)
into the Oblique Beam (F)
