background image

Cautions: 

 

1. Keep all children and pets away from assembly area. Children and pets should be supervised when they 

are in the area of gazebo construction. 

2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage, house, 

overhanging branches, laundry line or electrical wires. 

3. This unit is heavy. Do not assemble this item alone. Four people are recommended for safe assembly. 

4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly. 

5. When assembling and using this product, basic safety precautions should always be followed to reduce the 

risk of personal injury and damage to equipment. Please read all instructions before assembly and use. 

6. For outdoor use only. Install on level ground. Do not cook inside the tent. 

7. Check all bolts for tightness before and during usage 

8. Pegs supplied must be used to hold this gazebo in place when upright. 

9. Warranty does not cover damage due to extreme weather conditions. 

10. Do not use candles, matches or open flames of any kind in or near a tent. 

11. Build campfires downwind and several meters away from a tent and be sure to fully extinguish campfires 

before leaving a campsite or before retiring for the night. 

12. Exercise extreme caution when using fuel-powered lanterns or heaters inside a tent and use 

battery-operated lanterns whenever possible. 

13. Do not refuel lamps, heaters or store flammable liquids inside a tent. 

14. Extinguish or turn off all lanterns before going to sleep. Do not smoke in a tent. 

15. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent is made of 

flame-resistant fabric. It is not fireproof. The fabric will burn if left in continuous contact with a flame source. 

 

Assembly Instructions: 

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The 

final product will be a quality piece that will go together smoothly and give years of enjoyment. 

   

Parts identification: For ease of identification, all parts are labeled to correspond to the Step number in which 

the part is used.

 

 

 

Summary of Contents for L-GZ717PST-E









Reviews: