Fig.3: Insert Long bar (E) into Short bar (D)
DŽ
Fig.4: Insert assembly part E & D into the connect hole of Big roof connector (G), simultaneously,
insert Straight tube for big roof (F) into the connect hole of Big roof connector (G). Then, screw
Hook (J) into Big roof connector (G).
Fig.5: Attach lower side of Long bar (E) onto the U-shaped of Post (C) by using Hex bolt (CC),
Flat washer (BB), Nut (DD)
Fig.6 Tighten the lower end of Straight tube for big roof (F) onto connecting of assembly screen
A & B by using Hex bolt (CC), Flaw washer (BB), Nut (DD). Cover big roof with Big canopy(L).
Do not fully extend it.
Fig.7: Insert Small roof bar (I) into the hole of Small roof connector (H)
Fig.8: Attach the lower end of Small roof bar (I) onto Shot bar (D) by using Hex bolt (CC), Flat
washer (BB), Nut (DD). Cover top with Small canopy (K) and fully extend it, then, finish stretching
Big canopy( L).
