Fig.1
：
Use Bolt (BB) and Flat Washer (CC) to fix Panel (B) and Panel (A).
Fig.2
：
Insert Long side support pole (D) into pole (E), attach pole (D) and (E) by using Bolt (AA) and Flat Washer
(CC).
Fig.3
：
Attach Pole C&D&E to Panel (A) and Panel (B) by using Bolt (BB) and Flat Washer (CC).
Hardware Pack used in Step 2
AA
M6X15 Bolt
4 PCS
BB
M6X32 Bolt
4PCS
CC
M6 Flat Washer
12PCS
HH
M6 Nut
4 PCS
Fig.4
：
Insert Corner connector (M&N) into panel (A) and (B).
Fig.5
：
Insert Pole (F) into Center Connector (J). (Notes: put the pole end with hole upwards as Fig 5-1 )
Fig.6
：
Insert end of Pole (F) into Corner Connector (M&N).
