background image

HARDWARE CONTENTS

M6×15

Bolt

M6×15

Hex Bolt

M6×25

Hex bolt

M6×30

bolt

Qty. 84

AA

SAFETY INFORMATION

WARNINGS

• This product is intended for outdoor use only and should be placed on flat, horizontal ground.

• Ensure enough clearance around the product.

• Before assembling the product, find level ground no less than 6 ft. away from any structures or

  obstructions, such as fences, garages, houses, overhanging branches, laundry lines, or electrical wires.

• The gazebo must be anchored with stakes onto the ground for added safety.

• It cannot be permanently attached to a concrete floor or platform.

• Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do not have enough anchorage

  in these types of soil.

• This product is for outdoor use only! Do not climb on top of the gazebo! Do not use the unit during an

  electrical storm!

CAUTIONS

• Any assembly or maintenance of the product must be carried out by adults onl

y.

• Arrange 6 or more manpower when assembling or moving the product.

• Some parts may contain sharp edges. 

W

ear protective gloves if necessar

y.

• Check all nuts and bolts periodically for tightness. When required, tighten them again.

• Do not hang any weights on the roof frame.

• Always keep children under close supervision when they are using or are around this product. Never

  leave children unattended.

Hook maximum weight: 33 lbs

M6 W

asher

Qty. 181

BB

M6 Nut

Qty. 16

CC

Qty. 16

M6×55

Bolt

Qty. 22 Qty. 22 Qty. 20

DD

EE

FF

GG

Please read and understand this entire manual before attempting to assemble, operate or install the

product. If you have any questions regarding the product, please call our customer service department

at 1-866-578-6569 from from 8:00 am EST to 8:00 pm PST. or email to 

[email protected]

M6 Nut

with cap

Qty. 1

HH

M6

W

rench

Qty. 1

Z

3

Φ

8×180

Stake

Qty. 16

I I

Summary of Contents for L-GZ238PST-10















Reviews: