Fig. 6:
Insert the connect bar (J2) to the big top bar (J1), fix them by using bolt (CC) and washer (BB).
Fig.6-1:
Insert the big top bar (J1) to the big top connector (O). Screw the hook (P) to big top connector (O).
Fig.7:
Attach the connect bar (J2) to the post (A) by using screw (EE), washer (BB) and nut (FF).
Fig.8:
Insert the short side bar (K) and long side bar (L) to the big top connector (O).
Fig.9:
Attach the side bar K (L) to the slanting bar connector (H) by using screw (EE), washer (BB) and nut
(FF).
Fig.10:
Insert the small top bar (R) to the small top connector (Q), then place the small canopy (S) onto the
small top and tighten.
Fig.11:
Place the large canopy (T) onto the big top,
do not spread it
. Attach assembled small top to the big
top bar (J1) by using screw (EE) , washer (BB) and nut (FF). Then s pread the large canopy (T) and tighten.
GG
Φ8X180 peg
16 PCS
HH
Small plastic ring
52 PCS
II
Big plastic ring
52 PCS
Hardware Pack 3
P12401A01001
P90701A07001
P90701B07007
Part NO.
QTY
CS NO.
Image
Description
