Fig.9:
Insert
arch
beam (G1) into arch
beam connector (H1)
or (H2).
Fig.10:
Insert small top
arch beam (C) into small
top connector (B1), and
attach hook (B2) to (B1).
Fig.12:
Put the large canopy
(Q) onto the top, then insert
small top arch beam (C) into
(D1) & (D2). Spread (Q) and
fix it to the frame by the hook
on the canopy.
Fig.11:
Put the small
canopy (P) onto the
small top, then attach
finial (A) to small top
connector (B1).
AA
M6X15 Bolt
46 PCS
BB
M6 Flat washer
46 PCS
Hardware Pack 2
Fig.13:
Lift the
assembled frame, insert
post 1 (M1) into post
connector (N1), fully
tighten by bolt (AA) and
washer (BB).
Fig.14:
Insert post (M2)
into post connector
(N2), fully tighten by bolt
(AA) and washer (BB).
Fig.16:
Attach long
side arch support
beam (O1) to post
(M1) or (M2) by bolt
(AA) and washer
(BB).
Fig.15:
Attach long side
arch support beam (O1)
to long decorative slot
(K1) & (K2) by bolt (AA)
and washer (BB).
