background image

Congratulations  on  your  purchase  of  our  SUNJOY  10x10  Gazebo  W/  Awning.  Our 
clear, easy to follow, step-by-step instructions will guide you through the assembly 
process from start to finish. 
 
 
IMPORTANT: 

1. When installing and assembling your gazebo, it is recommended that two or more adults 
are involved. 
2. Do not use the gazebo during an electrical storm, as there is a remote chance of getting 
struck by lightning. 
3.  Do  not  climb  on  top  of  the  gazebo.  Falling  off  the  gazebo  can  result  in  serious  injury, 
possibly even death. 
4.  Do  not  leave  the  gazebo  assembled  when  there  is  a  risk  of  high  wind,  as  possible 
damage will occur to the structure. 
5. Do not use lanterns that contain open flames. 
6.  This  package  contains  small  items  and  plastic  bags  that  should  be  kept  away  from 
children. 
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do 
that before use so as to avoid collapsing or damage to the item, which could result in injury. 
8. 

KEEP ALL FLAME AWAY FROM THIS SHELTER FABRIC. 

The fabric may burn if it is 

exposed  to  prolonged  contact  with  a  flame  source.  The  application  of  any  foreign 
substance to the fabric may render the flame-resistant properties ineffective. 
 
 

USE & CARE: 

1. This gazebo is not a permanent structure. The canopy top should never be left on during 
periods  of  extended  or  heavy  rain  nor  any  inclement  weather  where  high  winds  or  wind 
gusts can occur. If left up, damage to the gazebo and surroundings can occur. 
2. Do not repack your gazebo until completely dry. 
3.  Steel  components  for  garden  accessories  and  furniture  are  treated  with  rust  inhibiting 
paint that  protects them from rust. However, due to the nature of steel, surface oxidation 
(rusting)  will  occur  if  this  protective  coating  is  scratched.  This  is  a  natural  process.  To 
minimize  this  condition,  it  is  recommended  that  care  be  taken  when  assembling  and 
handling the product in order to prevent the paint from being scratched. Surface rust can be 
removed  easily  using  a  very  light  application  of  common  cooking  oil.  If  surface  oxidation 
(rusting) occurs and no measures are taken to correct it, the oxidation may start dripping 
onto the deck or patio, which may cause damaging stains that may be difficult to remove. 
 
 
 
 
 

 

 

Summary of Contents for L-GZ1023PST-A










Reviews: