background image

8

 
USE & CARE:     

1. This Gazebo is not a permanent structure and should be disassembled & stored away after 

use.   

2. Do not repack your gazebo until completely dry.     

3. This Gazebo must be assembled by Four adults or more.     

4. This Gazebo must not be left erect in windy conditions.     

5. Loading limit of the hook is 45 lbs.   

6. Loading limit of the ring is 25 lbs.   

7. Loading limit of the glass side bar top is 33 lbs.     

 

WARNINGS:   

1. Assembly Instructions must be followed.     

2. Pegs supplied must be used to hold this gazebo in place when upright.   

  3. Warranty does not cover damage due to extreme weather conditions.     

4. Do not use candles, matches or open flames of any kind in or near a tent.   

5. Do not cook inside the tent.   

6. Build campfires downwind and several meters away from a tent and be sure to fully 

extinguish campfires before leaving a campsite or before retiring for the night.     

7. Exercise extreme caution when using fuel-powered lanterns or heaters inside a tent and use 

battery-operated lanterns whenever possible.   

8. Do not refuel lamps, heaters or stoves inside a tent.   

9. Extinguish or turn off all lanterns before going to sleep.   

10. Do not smoke in a tent.   

11. Do not store flammable liquids inside a tent.   

12. KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent is 

made of flame-resistant fabric. It is not fireproof. The fabric will burn if left in continuous contact 

with a flame source. 

 

 
 
 

 

 

 

 

Summary of Contents for L-GZ076PST-1B









Reviews: