ASSEMBLY STEPS:
STEP 1:
Use bolts AA, washers BB to fix panels A and B, place them on right position as fig.1
Insert pole D into pole C, joint pole E and F, as fig.2, fig.3.
Connect poles C D E F with panels A and B to set up the frame, as fig.4;
STEP 2:
Insert pole G into connectors H H1, as fig.6;
Fix connectors H H1 with panels A and B, as fig.4;
Insert another end of pole G into center connector J, as fig. 5;
Then connect pole K with pole F and center connector J to finish canopy frame assembly,
as fig.5 fig.7;
STEP 3:
Assemble canopy L on frame, do not tighten, fully assemble top canopy M on pole G, and tighten
canopy L, then use nuts CC washers DD to fix hangers I on connectors H, H1, as fig.8;
Use plastic tie TT to fix mosquito netting N on poles C D E F;
Use pegs GG to fix gazebo on ground, as fig.9;
Now your gazebo is ready for use.
