BATTERY/LIGHTING UNIT INSTRUCTIONS:
CARE AND MAINTENANCE:
Immediately remove any spot or stain.
Wash with mild soap. Then rinse with water and air dry.
Do not use strong solvents or bleach as they may damage the surface.
Use an outdoor cover to extend the life of your patio set.
Disassemble the lighting unit for storage to extend its working life.
TROUBLE SHOOTING:
Problem
Possible Cause
Corrective Action
Can
’t align the bolt holes.
Other components are
over-tightened.
Loosen the other bolts and realign
the holes before screwing again.
Step 3:
Turn over the the whole assembled piece.
Place glass top (E) with the smooth surface facing
upwards on slate table top (A), locate lighting unit
(D1) under glass top (E) through the central hole and
fix with lighting unit top ring (D2).
Now your table is ready for use.
D2
D1
E
1. Six AAA batteries are sold separately.
2. When you install new batteries, open the battery cover
according to labeling on battery compartment. Then, put the
batteries on top of the band and align batteries according to
the labeling as Fig.1.
3. Remove the batteries by pulling off the band.
4. Switch the light unit on/off by turning the top Ring X at the
top of the lighting unit as Fig.2.
Fig.2
Fig.1
