2
Put the table reversed(pay attention to the desktop). As picture, put AA through CC. Secure leg(B) to tabletop(A)
by using DD. Use hex key FF to secure all screws, then adjust the foot underlay and set the table stand.
As picture: put BB through CC, use DD to secure fixed ring(C) to leg(B). Do not secure it tightly.
（
4 pcs
）
.
Step 1:
B
Step 2:
A
Tabletop
Warning, Care & Maintenance
•
Read and follow all below statements and instructions before assembly.
•
Repeated assembly can weaken the locking ability of the hardware.
Periodically check all bolted connections on your product to make sure
they are tight and secure. Keep these instructions for future reference.
•
Some parts may contain sharp edges. Wear protective gloves as necessary.
•
This unit is heavy. Do not assemble it alone. 2 adults are needed for
safe assembly. Keep children and parts away from assembly area.
•
Do NOT over tighten any of the bolts or nuts. Ensure that the nuts are
NOT put on cross threaded before tightening.
•
When not in use, always clean, cover and then store the product in a
dry location for a longer life. Do NOT use strong detergent or abrasive
cleaners.
Leg
Fixed ring
M6*20 bolt
M6*30 bolt
M6 Spring Washer
M6 Flat washer
Foot underlay (fix on leg B)
M6 hex key
B
C
AA
BB
CC
DD
EE
FF
1
4
1
8
4
12
12
4
1
B
B
C
AA
CC
DD
B
A
A
BB cc DD
