NOTE:
Gently set parts on a flat, non-abrasive surface. Verify there are no missing parts.
Assembly Diagram:
Step 1:
Attach Foot Plate (F) to Bridge Rail (A) with 4 Bolts
(e) and 4 Flat Washers (f).
See Fig. 1-1. Repeat for the
other 3 Bridge Rail Posts. Please note that the holes
should be facing out for ease of installing stake/expansion
bolts as illustrated in Fig. 1-2.
Fully tighten hardware.
Step 2:
Insert the bolt under Side Rail (C) to the pre-attached hole on
the leg of Bridge Rail (A) and fasten with Flat Washer (c), Spring
Washer (b) and Nut (d). Secure Bridge Rail (A) with Bolt (a), Spring
Washer (b) and Flat Washer (c). Fully tighten hardware. Repeat for
other 3 Bridge Rail Posts. See Fig. 2.
Step 3:
Attach Middle Rail (D) to Bridge Rail (A) with Flat
Washer (c), Spring Washer (b) and Bolt (a). Fully
tighten hardware. Repeat for opposite end of Middle Rail.
See Fig. 3.
Fig. 1-2
