7 of 11
INSTALLATION
Installation will be much easier with two or more people.
LOCATION
Your SUNJOY Gas Fire Pit must be installed on flat, stable surface, away from any combustible
materials or construction.
SET-UP
Your SUNJOY Gas Fire Pit comes assembled, ready for a Gas connection.
1- Remove Fire Pit from container box and place it on any level, outdoor, non-combustible surface.
NOTE: Do not place this appliance on grass or dirt area. This may prevent proper safety venting.
2- Open the gas door, put the cylinder inside.
3- Unscrew the battery box as shown in Fig 1.Insert the negative electrode side of the battery into the
bottom of battery box as shown in Fig 2. Then screw the battery box as shown in Fig 3.
Fig 1 Fig 2 Fig 3
Note: If the battery of the pulse electronic igniter runs out of power, please replace the new battery as
step 3 above.
Gas Connection
1- Open the door, put the chain and control valve outside. See Fig 4
2- Put the tank into the tank rack. See Fig 5
3- Connect the regulator and the tank as per Fig.6. Make sure there is no leakage.
4- Fix the tank by the chain. See Fig 7.
Fig 4
Fig 5
