7
Step#3
Hardware Pack 3
（
X8
）
JJ
Ф
6X180 Stake
（
X 40
）
kk
Plastic Ring
（
X1
）
Touch up paint
Insert short hanging bar(A2) into top
bar 1(B2) and use bolt(DD) and
extra-big flat washer(EE) to fix them,as
shown in fig.6.
Insert
hook(D2)
into
top
center
connector(E2),as
shown in fig.7.
Ladder is required.
One person lift the
top center connector(E2) and insert the
assembled top bar 1(B2) into the
longer
tube
of
the
top
center
connector ,as shown in fig.8-1.
Use bolt (FF),extra-big flat washer (CC) and
nut(GG) to fix top bar 2(C2) to screen
connector(F1) and then tighten them,as
shown in fig.9-2
Use bolt (FF),extra-big flat washer (CC)
and nut(GG) to fix short hanging bar(A2)
to triangle enhancement (G1) ,and then
tighten them,as shown in fig.8-2
Insert the end(with spring buttom ) of the the top
bar 2(C2) into the top center connector(E2),as
shown in fig.9-1
