4
/
7
Hardware Pack 2
BB
M6 Flat Washer
16pcs
CC
M6 Nut
8PCS
DD
M6*45 Screw
8pcs
Z2
M6 Wrench
1 PCS
Fig.4 Screw Hook (B) into Large
Top Connector (D), then insert
Top Bar 2(F) into Large Top
Connector (D).
Fig.5 Connect Top Bar 2(F) and
Pole (H1/H2/H3/H4) by using
Screw (DD), Flat Washer (BB)
and Nut (CC).
Fig.6 Insert Top Bar 1(E)
into Large Top Connector
(D).
Fig.7 Connect Top Bar 1(E) and
Pole (H1/H2/H3/H4) by using Screw
(DD) Washer (BB) and Nut (CC),
and Put Big Canopy (K) onto the big
top frame.
Fig.9 Insert Small Top Bar
(C) into Top Bar 1(E).
Fig.8 Insert Small Top Bar (C) into
Small Top Connector (A). Put Big
Canopy (K) onto the big top frame,
do not spread it out.
