Fig.1: Attach the Long Screen (E) and the Short Screen (F) to Post (A1
、
A2
、
A3) with the Bolt (I).
Fig.2: Attach the Big Beam (B) to the Big Connector (C), and then attach the Hook (L ) to the Big
Connector (C).
Fig.3: Insert the connector of the Big Beam (B) into the intubation tube of Post (A1, A2, A3), then
put the Big Canopy (J) on big top, do not fully spread.
Fig.4: Insert the bottom connector of the Small Beam
（
D
）
to the upper pole of the Big Beam
（
B
）
.
Fig.5
:
Extend the Small Canopy (K) onto the small top by fixing the canopy at four corners of top.
Fig.6
:
Take off the back cover of LED light (M), and match batteries into sockets. Attach back
cover to LED light (M).(Note: to purchase "AAA” battery for LED)
Fig.6-1
:
Hang the assembled LED light (M) into holes of Beam (B) (Note: Pull down forward tightly
after LED lights hung into Beam holes).
