Country of Origin: China
Production Number: 20187753
ASSEMBLY STEPS – Coffee Table
Care & Maintenance:
Before using, clean the product completely with a soft dry towel.
When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly
and dry completely. Do not use strong detergent or abrasive cleaners.
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to the nature
of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product, in order
to prevent the paint from being scratched
.
Limited Warranty:
The item is warranted to be free from defects in material or workmanship for a period of twelve (
12)
months. However, we do not reimburse for transportation or delivery costs, nor compensate the individual or any outside
party for assembling or disassembling the product. This limited warranty is extended to the original purchaser and applies
to defects in materials and workmanship of your item, provided the item is maintained with care and used only for personal
residential purposes.
Exclusions
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism,
misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated
register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any
replacement of warranted items will be in the original style and color or a similar style and color if the original is
unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the
above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights,
which vary from state to state.
Fig 8:
Attach table legs (A) to table base
(C3) using bolt (E) and flat washer (D), do
not tighten at this moment.
Fig 9:
Attach table top (B3) to table legs
(A) using bolt (E) and flat washer (D),
tighten all the bolts with wrench (G),
assembly is complete
