6
/
9
Country of Origin: China
Fig.7:Attach Big top frame(short)
（
N2
）
to Big top frame(long)(N1) by using bolt (DD) and washer (BB).
Fig.8:Attach Slanting bar(F) to the top of post by using bolt (AA) and washer
（
BB
）
.
Fig.9:Install the Slanting bar(F) into the Slanting bar connector(H)of the Slanting bar(F), and then use the
bolt(CC)through the gasket(BB)to fix(H) at her lower end of large roof frame.
Fig.10: Insert middle beam
（
G1/G2
）
to middle beam connector
（
I
）
.
Fig.11: Attach middle beam (G1/G2) to Big top frame(N1/N2) by using bolt (CC) and washer (BB) Put big
canopy(R) to the top, Don’t open.
Fig.12:Insert Slanting bar for small top(L1/L2) to Small top connector(K),then screw the hook(M) to Small
top connector(K).
Fig.13-1
、
Fig.13-2:Insatll the regulating pipe(U) into the Slanting bar for small top and minimize the
regulating pipe(U).
Fig.13: Put Small canopy(Q) to the small top.
Fig.14-1
、
Fig.14-2
：
Put small canopy
four corner
（
Q
）
to small top frame end
of adjustable tube
（
U
）（
as Fig.14-2
）
adjust tube length till the canopy tight.
