STEP1: Screen
，
Gutter
Fig.1
Fig. 1
Fig. 2
Attach part 1A to part 1E using bolts AA and
washers BB. Repeat this procedure for the
other launders and rails, as shown in Fig. 1.
Unscrew the pre-installed bolts (CC) on part 1I,
and attach the 1A & 1E and 1B & 1F
assemblies to part 1I using washers BB and
bolts DD. Attach part 1A to part 1B using
washers BB and bolts DD, as shown in Fig. 2.
Tighten the pre-installed bolts on part 1I
securely.
1L
1F
1C
Fig. 3
Insert part 1L into one side of the launder (1F),
and then insert parts 1F and 1B into
the other side of parts 1G and 1C.
Secure parts 1B, 1C, and 1F together
and secure part 1G to part 1M using
bolts DD and washers BB, as shown
in Fig. 3.
Hardware Pack 1
