Fig1-1
、
Fig1-2
：
Insert the pin on the left panel (B1) into the large panel (A), pull down the left panel (B1) to fix
with t
he large panel (A) as Fig.1-2, then connect B1 & A by using bolt (AA) and washer (CC). Connect the right
panel (B2) to the large panel (A) in same way. Please do not tighten the bolts here.
Fig1-
3
．
Connect the long crossbeam (C1) to assembled panels (B1 & B2) by using bolt (BB) and washer
(CC).Connect the short cross beam (C2) to assembled panels in same way.
Please do not tighten the bolts
here.
Fig1-4. Connect the short netting bar (D
2
) to the
long
side of panels (B1 & B2)
and Long Cross Beam (C1)
by
using screw (FF) and washer (CC). Connect the long netting bar (D
1
) to the
short
side of panels (B1 & B2),
corner netting bar (D3) to the large panel (A) in same way.
