10
7H`ZWLJPHSH[[LU[PVU^OLUJOHUNPUNKPYLJ[PVU(WWS`
light pressure to the handle in order to lift the blades and
facilitate the turn. Turn the product around using the wheels
as a guide. Gradually release pressure on the handle and
move the blades back to the ground.
m
WARNING!
Stop the motor if the product strikes a
MVYLPNUVIQLJ[:^P[JO[OLWYVK\J[VɈKPZJVUULJ[P[MYVT[OL
power supply, and let it cool completely. Inspect the product
thoroughly for damage and have any damage repaired before
restarting.
Extensive vibration of the product during operation is an
indication of damage. Immediately stop the motor and
promptly inspect and repair the tool.
After Use
:^P[JO[OLWYVK\J[VɈKPZJVUULJ[P[MYVT[OLWV^LY
supply,
and let it cool completely.
Check, clean, and store the product as described below.
Care + Maintenance
The Golden Rules for Care
m
WARNING!
(S^H`ZZ^P[JO[OLWYVK\J[VɈKPZJVUULJ[
the product from the power supply, and let the product cool
completely before inspecting, cleaning, or performing any
other maintenance task.
2LLW[OLWYVK\J[JSLHU9LTV]LHU`KLIYPZHM[LYLHJO\ZL
and before storage.
9LN\SHYHUKWYVWLYJSLHUPUN^PSSOLSWLUZ\YLZHML\ZLHUK
prolong the life of the product.
0UZWLJ[[OLWYVK\J[ILMVYLLHJO\ZLMVY^VYUHUKKHTHNLK
WHY[Z0M`V\ÄUKIYVRLUHUKVY^VYUWHY[ZKVUV[\ZL[OL
tool.
m
WARNING!
Only perform the repairs and maintenance
work described in this manual. Any other work must be
WLYMVYTLKI`HX\HSPÄLK[LJOUPJPHU
General Cleaning
*SLHU[OLWYVK\J[^P[OHKY`JSV[O<ZLHIY\ZOMVYHYLHZ
that are hard to reach.
)LZ\YL[VJSLHU[OLHPY]LU[ZHM[LYL]LY`\ZL^P[OHJSV[O
and brush.
9LTV]LZ[\IIVYUKPY[^P[OOPNOWYLZZ\YLHPYTH_IHY
NOTE:
Do not use chemical, alkaline, abrasive, or other
aggressive detergents or disinfectants to clean this product as
such substances might damage the tool's surfaces.
*OLJRMVY^VYUVYKHTHNLKWHY[Z9LWSHJL^VYUWHY[ZHZ
necessary
Cleaning the Und Working Tool
m
WARNING!
Wear safety gloves when working on or
near the working tool. Use appropriate tools (e.g a wooden
stick) when necessary; never use your bare hands!
2LLW[OL\UKLYIVK`HUKISHKLZJSLHUHUKMYLLVMKLIYPZ
Use a brush or another implement to remove soil from the
working tool.
All nuts and bolts must be checked periodically for
tightness before operation. After prolonged use, especially
in sandy soil conditions, the working tool will become worn
HUKSVZLZVTLVMP[ZVYPNPUHSZOHWL;PSSPUNLɉJPLUJ`^PSSIL
reduced and the working tool should be replaced.
/H]L^VYUVYKHTHNLK^VYRPUNWHY[ZYLWSHJLK^P[OUL^
VULZVM[OLZHTL[`WLI`HX\HSPÄLK[LJOUPJPHU
;VWYVSVUN[OLSPMLZWHUVM[OL^VYRPUN[VVSHUK[OLWYVK\J[
lubricate the blades after each use.
Maintenance
m
WARNING!
Unexpected blade movement may cause
personal injury. Before servicing, repairing, or inspecting
the unit, turn the motor OFF and disconnect the extension
cord. Wait for the blades to completely stop rotating before
conducting inspection, cleaning, or maintenance.
Before and after each use, check the product and accessories
(or attachments) for wear and damage. When necessary, only
use identical replacement parts that are approved by the
manufacturer.
m
WARNING!
Contact with hot components (e.g. motor
housing, gear box, etc.) on the machine may cause burns.
(SSV^[OLTHJOPUL[VJVVSVɈILMVYLOHUKSPUN
IMPORTANT!
Wear protective gloves when cleaning or maintaining the
machine.
+VUV[\ZLJSLHUPUNÅ\PKZVYZVS]LU[ZVYZWYH`[OL
machine down with water (especially water under
pressure) when cleaning the machine.
Fig. 8
