7
Unpacking
Carton Contents
• Electric cultivator housing
• Left handle grip
• Right handle grip
• Plastic Cross plate
• Screws (2)
• Handle knob and bolt (2)
• Cable clips (2)
• Cable restraint holder
• Manual with registration card
1. Carefully remove the electric cultivator and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric
cultivator. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
m
WARNING!
To prevent serious personal injury,
make sure the switch is in the OFF (O) position, the unit is
unplugged, and the tines have come to a complete stop before
inspecting, cleaning, or servicing the unit.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
Follow the assembly instructions step-by-step and use
the pictures provided as a visual guide to easily assemble
the product.
Connecting the Handles
NOTE: Reference to right or left side of the tiller is determined
from behind the unit in the operating position. The “Operator’s
position” is defined as standing directly behind the tiller.
NOTE: Small parts can easily get lost during assembly or when
making adjustments to the machine. To avoid this, secure all
small parts that are removed from the box or machine and
keep them accessible.
1. Slide the right-hand grip and left-hand grip into the plastic
cross plate by matching the holes in the back of the grips
with the holes in the back of the cross plate (Figs. 1 – 3).
NOTE: Use a phillips-head screwdriver. Aligning the holes
may be difficult. We recommend fastening one hand grip
at a time to the cross plate.
Fig. 1
Right hand grip
Left hand
grip
Plastic cross plate
Fig. 2
Align the bottom of beam with
the white line on the side of upper
handle before tightening 2 screws
Summary of Contents for TJ600E
Page 14: ...14 NOTES ...
