background image

5

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all 

instructions on the machine before attempting to assemble and operate.

To reduce the risk of injury, user 

must keep all bystanders at least 

49 ft (15 m) away.

Sound power level is 96 dB(A).

READ THE OPERATOR'S 

MANUAL(S) – Read, understand, 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – Indicates a 

precaution, a warning, or a danger.

WEAR EYE AND HEARING 

PROTECTION – For protection 

against injury, wear ear defenders 

and safety goggles.

WARNING! Do not expose the unit 

to rain or wet conditions. Keep dry.

Machine not suitable for connection 

to the potable water mains.

Symbols

Symbols

Descriptions

Descriptions

Wear non-slip footwear that will 

protect your feet and improve your 

footing on slippery surfaces.

Wear safety gloves during  

use to protect hands.

Store indoors. Never store the 

pressure washer outdoors.

If the pump freezes, permanent 

damage may result. 

Indoor use only. Only use battery 

charger indoors.

Summary of Contents for SPX6001C-CT

























Reviews: