background image

Unpacking

Carton Contents:

• Pressure washer unit
• Manual
• Trigger gun
• Spray wand
• Quick connect 0º, 15º, 25º, 40º and soap nozzles
• Removable detergent tanks (2)
• Needle clean out tool
• High pressure hose
• Garden hose adaptor (female coupler)

1. 

Carefully remove the contents from the shipping carton. 
Make sure that all items listed in the carton contents are 
included.

2. 

Inspect the product carefully to make sure no breakage 
or damage occurred during shipping. If you find damaged 
or missing parts, DO NOT return to the store. Please call 
1-866-766-9563. 

NOTE:

 Do not discard the shipping carton and packaging 

material until you are ready to use your new Electric Pressure 
Washer.

Assembly

1. 

Position the washer as NEAR as possible to the water 
supply.

2. 

The washer must be used on a secure and stable surface 
in a standing, upright position (Fig. 1).

3. 

Connect the PVC detergent tube to the detergent 
connection (Fig. 2).

4. 

Fit the spray wand into the gun and rotate it until the two 
parts are completely locked (Fig. 3).

5. 

Connect the high pressure hose to the trigger gun (Fig. 4).

Fig. 1

Fig. 2

Detergent 
connection

Detergent tank

Detergent tube

Fig. 3

High Pressure Hose

Trigger gun

Fig. 4

5

Summary of Contents for SPX3000













Reviews: