sunjoe SBJ702E, Operator'S Manual

Page: 8 / 16

8
2. To release the bag, simply press the spring lever (Fig. 5).
Operation
Tube Height Adjustment
The length of vacuum/blowing tube can be adjusted up to
300 mm to fit various blow/vacuum distance. To adjust the
length of the tube, follow the instruction below.
m
WARNING!
To prevent serious personal injury, make
sure the trigger switch is off, the unit is unplugged and the
impeller has come to a complete stop when adjusting the
tubes.
1. Press the height adjusting button and slide the vacuum/
blower tube down to desired length (Fig. 6).
2. Release the height adjustment button.
Front Handle Adjustment
1. Press the angle adjustment button on the front handle,
and turn the front angle to a comfortable place (Fig. 7).
2. Release the angle adjustment button and the front handle
will reset to lock into position automatically.
Rake Adjustment
The unit is equipped with rake at the end of the blowing/
vacuuming tube. The rake is controlled by the rake knob.
When the knob handle is in vertical position, the rake is locked.
When the knob handle is in horizontal position, the rake is free
to adjustment (Fig. 8). To use the rake, follow the instruction
below.
1. Rotate the rake knob to unlock the rake, the knob will
slide down and the rake will pop-up (Fig. 9).
Fig. 5
Spring lever
Height adjustment
button
Fig. 6
Vacuum/blower
tube
Press
Fig. 7
Angle adjustment button
Front handle
Fig. 8
LOCKED
The knob handle is vertical
UNLOCKED
The knob handle is horizontal
Fig. 9
Rake knob
Blowing/
vacuuming
tube
Rake