background image

9

Replacing the Hydraulic Oil

After every 150 hours of use, the hydraulic oil needs to  

be replaced. The following hydraulic oils or equivalent  

are recommend for the log splitter’s hydraulic 

 transmission system.

•  SHELL Tellus 22
•  MOBIL DTE 11
•  ARAL Vitam GF 22
•  BP Energol HLP-HM 22

To replace the hydraulic oil, follow the instructions below.

1. 

Turn off and unplug the log splitter. Make sure all moving 

parts have come to a complete stop. 

2.  Unscrew to remove the oil drain bolt with dipstick (Fig. 7).
 

3.  Turn the log splitter and let it stand on the supporting leg 

to drain the hydraulic oil off (Fig. 8).

4.  Turn the log splitter and let it stand on the rear wheels, 

and refill the hydraulic oil into the hole behind the oil drain 

bolt with dipstick (Fig. 9).

5.  Clean the oil drain bolt before thread them back. Make 

sure it is tightened to avoid leakage before place the log 

splitter horizontally. 

Storage

•  Before storing, make sure the log splitter is clean and 

 

dry. Such upkeep is necessary to ensure years of  

trouble-free performance.

•  Lightly lubricate all metal surfaces before storing.
• 

Store the machine in a secure location that children 

cannot access. Store the machine in a dry environment. 

The machine can be transported or stored in the ambient 

temperature between 77ºF – 131ºF (25ºC – 55ºC). 

•  Examine the log splitter thoroughly for worn, loose, or 

damaged parts. Should you need to repair or replace a 

part, contact an authorized Snow Joe

®

 + Sun Joe

®

 dealer 

or call the Snow Joe

®

 + Sun Joe

®

 customer service center 

at 1-866-SNOWJOE (1-866-766-9563) for assistance.

S Support

If your Sun Joe

®

 LJ602E electric log splitter requires service or 

maintenance, please call 1-866-SNOWJOE (1-866-766-9563) 

for assistance.

Model + Serial Numbers

When contacting the company or reordering parts, you will 

need to provide the model and serial numbers of your product. 

These are found on the decal affixed to the housing or handle 

of your log splitter. Copy these numbers into the space  

provided  below.   

Fig. 7

Oil drain bolt 

with dipstick

Fig. 8

Supporting leg

Fig. 9

Rear wheel

Refill oil here

Record the following numbers from the housing or handle of your  

new product:

Model #:

L   J    6   0    2   E

Serial #:

Summary of Contents for LJ602E













Reviews: