background image

3

• 

Regularly check the following:

i)  Blades are clear and can rotate freely –  

Accumulation of debris around the blades could impair 

performance or damage the motor. Inspect and clean 

the area around the blades before every use.

ii)  Safety devices are operating properly –

  

Do not tamper with or adjust safety devices.

iii)  Bolts and screws are properly tightened –  

Visually inspect the machine for any damage and ensure 

that the cordless cultivator is in safe working 

condition.

iv)  Use only identical replacement parts –  

Always replace damaged parts with original equipment 

manufacturer’s (OEM) parts only. Replacement parts 

that do not meet the original equipment specifications 

may lead to improper performance and compromise 

safety.

Battery & Charger  

Safety Instructions

We pay a great deal of attention to the design of every battery 

pack to ensure that we supply you with batteries that are safe, 

durable and have a high energy density. The battery cells have 

a wide range of safety devices. Each individual cell is initially 

formatted and its electrical characteristic curves are recorded. 

This data is then used exclusively to be able to assemble the 

best possible battery packs.
Despite all the safety precautions, caution must always be 

exercised when handling batteries. The following points must 

be obeyed at all times to ensure safe use. Safe use can only 

be guaranteed if undamaged cells are used. Incorrect handling 

of the battery pack can cause cell damage.

IMPORTANT!

 Analyses confirm that incorrect use and poor 

care of high-performance batteries are the main factors 

responsible for personal and/or product damage.

m

WARNING!

 

Use only approved replacement batteries; 

other batteries may damage the power tool and cause it to 

malfunction, which can lead to serious personal injury.

m

WARNING!

 

Do not use a battery pack or appliance that 

is damaged or modified. Damaged or modified batteries may 

exhibit unpredictable behavior resulting in fire, explosion or risk 

of injury.
Do not modify or attempt to repair the appliance or the battery 

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualified repair person 

using only identical replacement parts. This will ensure that the 

safety of the battery pack is maintained.

m

CAUTION!

 To reduce the risk of injury, charge the

24V iON+ lithium-ion battery pack only in its designated 24V 

iON+ lithium-ion charger. Other types of chargers present risk 

of fire, personal injury and damage. Do not wire a battery pack 

to a power supply plug or car cigarette lighter. Such misuse 

will permanently disable or damage the battery pack.

• 

Avoid dangerous environments –

 Do not charge the 

battery pack in rain, snow or in damp or wet locations. 

Do not use the battery pack or charger in the presence of 

explosive atmospheres (gaseous fumes, dust or flammable 

materials) because sparks may be generated when inserting 

or removing the battery pack, which could lead to a fire.

• 

Charge in a well-ventilated area – 

Do not block the 

charger vents. Keep them clear to allow for proper 

ventilation. Do not allow smoking or open flames near a 

charging battery pack. Vented gases may explode.

 

NOTE:

 The safe temperature range for the battery is 41°F 

(5°C) to 105°F (40.5°C). Do not charge the battery outside in 

freezing weather; charge it at room temperature. 

• 

Maintain charger cord –

 When unplugging the charger,  

pull the plug, not the cord, from the receptacle to reduce 

the risk of damage to the electrical plug and cord.  

Never carry the charger by its cord or yank it by the cord 

to disconnect it from the receptacle. Keep the cord away 

from heat, oil and sharp edges. Make sure the cord will not 

be stepped on, tripped over or subjected to damage or 

stress when the charger is in use. Do not use the charger 

with a damaged cord or plug. Replace a damaged charger 

immediately.

• 

Do not use an extension cord unless it is absolutely 

necessary – 

Using the wrong, damaged or improperly 

wired extension cord poses a risk of fire and electric shock. 

If an extension cord must be used, plug the charger into a 

properly wired 16 gauge or larger extension cord with the 

female plug matching the male plug on the charger.  

Make sure that the extension cord is in good electrical 

condition.

• 

Use only recommended attachments –

 Use of an 

attachment not recommended or sold by the battery 

charger or battery pack manufacturer may result in risk of 

fire, electric shock or personal injury.

• 

Unplug charger when not in use –

 Make sure to remove 

battery packs from unplugged chargers.

m

WARNING! 

To reduce the risk of electric shock, 

always unplug the charger before performing any cleaning 

or maintenance. Do not allow water to flow into the charger. 

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock 

hazards.

• 

Do not burn or incinerate battery packs –

  

Battery packs may explode, causing personal injury or 

damage. Toxic fumes and materials are created when 

battery packs are burned.

• 

Do not crush, drop or damage battery packs –  

Do not use the battery pack or charger if they have 

sustained a sharp blow, been dropped, run over or have 

been damaged in any way (i.e. pierced with a nail, hit with a 

hammer, stepped on, etc.).

Summary of Contents for 24V-TLR-SJG





















Reviews: