39
PSK (256-bit key pre-shared key supported)
802.1X and Radius supported
TKIP encryption
Wireless Security
SSID broadcast disable
LED Indicators
PWR 1(2) (PoE, WAP-5002P) / Ready:
1) Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or DHCP or
BOOTP server did not respond properly.
2) Green On: Power is on and functioning normally.
Green Blinking: Located by Administrator.
ETH1 (2) Link / ACT:
Orange ON/Blinking: 10 Mbps Ethernet
Green ON/Blinking: 100 Mbps Ethernet
WLAN Link/ACT: Green: Link, Orange: Poor signal
WLAN Strength:1<25%, 2<50%, 3<75%, 4<100%
Fault: WLAN link down (Red)
Power Requirements
Power Input Voltage
PWR1/2: 12 ~ 48VDC in 6-pin Terminal Block
Reverse Polarity Protection
Present
Power Consumption
6 Watts Max
Environmental
Operating Temperature
-10 to 55
o
C
Storage Temperature
-20 to 75
o
C
Operating Humidity
5% to 95%, non-condensing
Mechanical
Dimensions(W x D x H)
52 mm(W)x 106 mm( D )x 144 mm(H)
Casing IP-30
protection
Regulatory Approvals
Regulatory Approvals
CE class A, RoHS
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4
(EFT), EN61000-4-5 (Surge), Level 3, EN61000-4-6 (CS),
Level 3
Shock IEC60068-2-27
Free Fall
IEC 60068-2-32
Vibration IEC
60068-2-6