SUNITEC ENTERPRISE CO.,LTD www.sunitec.com
Instruction for Headset Mode:
Preparation & Start to Use:
Make sure the phone is with Bluetooth function or connected to Bluetooth Adaptor.
First Time Use:
(A) Pairing this unit with phones - Configuration set up.
(B) Locate this unit to phones within 10 meters(max.).
(C) Please fully charge this unit with the attached mini AC/DC charger. It takes 1.5 to 2 hrs. to charge it.
(approx.)
(D) Please refer to Bluetooth function access of each phones. (Bluetooth access could be varied between
different phones.)
For ERI Phones:
(A) Enter into Pairing Mode:
(a) This unit is first set under off mode - LEDs are off.
(b) To enter into pairing mode, press function key for 7 seconds (approx..) until red & green LEDs blink in turn.
Mean while, a short beep will come up.
(B) Pairing Between Phones and Headset:
(a) Initiate Bluetooth function of phones & search for Bluetooth devices.
For example: ERI T68i, procedure is "Menu/Connect/Bluetooth/Paired Device/Add Device/Phone initiates/All
types"
(b) Phones will start searching for Bluetooth devices. If it's successful, phone screen will indicate the name of
obtained device - “Earpiece”(This can be customized upon customer's request.) Press "Yes" to pair this unit to
the phones.
(c) Input ID code of this unit - "8888". (This can be customized upon customer's request.) Press "Yes" to
complete pairing. (Pairing procedure might be varied because of different phones. Users are recommended
to refer to individual User's Manual.) Mean while, this unit is under stand-by mode - green LED blinks once
every 4 seconds.
(d) To remove pairing, constantly press function key for 3 seconds until both green & red LEDs are off. Mean
while, a short beep comes up.
(C) To Use Headset :
Once pairing is successful, this unit is under stand-by mode and ready for Bluetooth communication.
Please locate this unit within 10 meters (max.) to phones.
(a)To Answer a Call:
When a call is in, a ringing tone will come out of this unit. Press function key, up & down, to answer a call.
(User may press phone key to answer, too.) Once it's under talking status, green LED blinks twice every 1.5
seconds.
(b) Not to Answer a Call:
When a call is in, a ringing tone will come out of this unit. If user doesn't intend to answer this call,
constantly press function key, up & down, for 3 seconds until ringing tone is off.
(c) Dialing out:
After pairing is done, user may dial out numbers through phones and talk through this unit. During
conversation, green LED blinks once every 1.5 seconds.
(d) Voice Activation:
