User Manual English
BTH-07A2 www.sunitec.com.tw
Page 2 of 6
®
About Bluetooth Headset #BTH-07A2
This versatile & super slim/light weighted Bluetooth Headset is specially designed for user to enjoy
convenience of
wireless communication. It also support Skype compatible VoIP calls. With the latest Bluetooth
technology Version 2.0
with EDR, it gives you imp eccable sound quality you've never experienced.
About Bluetooth Technology?
Bluetooth wireless technology is set to revolutionize the personal connectivity by providing freedom from
wired connections-enabling links and connectivity between mobile computers, mobile phones, portable
handheld devices and other Bluetooth enables devices within 10 meters. Utilizing global sound & digital
data 2.4G ISM transmission, it makes global communication in the way you've never dreamed of!
Getting to Know Your Bluetooth Headset
Getting Started
The Bluetooth headset comes with a built-in rechargeable battery. Prior to using the headset, it is
recommendable to charge the battery fully for the first time. Please follow these simple steps:
(a) Charge your headset. Prior to using the headset, it is recommendable to charge the battery fully for the
first time.
(b) Connect the charger to an AC wall outlet and the charge plug to the headset’s charging socket. After
completion of charge, please remove the chargers from headset and outlet.
(c) Place your headset and a Bluetooth-enabled mobile handset no more than 1 meter apart for pairing.
(d) Ensure your headset and handset is within 10 meters(max.) - Bluetooth sensing distance.
IMPORTANT:
(a) Charge time: Normal full charge time is 2 hrs. (Approx.).
(b) Charge indication: When charge is in process, the LED will flash red. When charge is completed, the
LED will flash off.
(c) Low voltage indication: You may hear 2 beeps from headset every 30 seconds with LED flashes red.
It’s recommended to charge the headset immediately to prolong durability of battery and standby time.
Under low voltage, if battery is not charged within certain time – 30 seconds(approx.), the headset will be
powered off.
(d) Charging indication will be delayed for a few minutes if the headset has not been used for a long time or
the battery is drained.
Turning On/Off the Headset
Turning On -
Headset under off mode:
(a) Press and hold the MFB for 3 seconds until you hear a short beep. The LED will flash blue for 1 second.
(b) Headset will be under standby mode. The LED will flash blue.
Turning Off
-
headset under any modes:
(a) Press and hold the MFB for 5 seconds until you hear a long beep. The LED will flash red for 1 second.
(b) Headset will be off. The LED will flash stop.
IMPORTANT:
Press the MFB again each time you turn on the headset to reactive the paring so that the
connection in between the headset and paired mobile handset is resumed. For pairing, please refer to
procedures under “Pairing”.
Pairing with a Mobile phone
