Sunit c6, User Manual, Page: 16 / 32

16
Field Description
On the sample
1 UTC time 070559 = 7h 05min 59sec
2, 3 Latitude N(orth), S(outh) 6413.1928 km north from
equator
4, 5 Longitude E(ast), W(est) 02747.0007 km east from
0 - meridian
6 GPS quality: 0 = missing,
1 = GPS, 2 = DGPS 2: DGPS is activated
7 Number of satellites connected 08: 8 satellites
8 Quality of horizontal signal 1.59
9, 10 Altitude above sea, units 160.6,M = 160.6 meters
11, 12 Geodesic correction, units 19.4M = 19.4 meters
13 Lag of DGPS data, sec. 0 s
14 0000*47 Differential reference station ID
7. USING THE COMPUTER
After the installation the cables must be checked before booting the computer!
7.1 Starting and shut-down
The starting mode is selectable in Sunit Telematics
Manual on-off (default)
- on: Press the on/off button briefly
- off: Use the operating system’s Shut-down feature only.
Automatic starting
- you can set the automatic starting adjustments in Sunit Telematics
Automatic shut-down
- you can adjust the mode of shut-down, delay and standby time in Sunit Telematics
Cold start
- the unit starts only after the pre-heating, when the temperature inside of the unit has r5°C.
Depending on the prevailing temperature, pre-heating can last 2 - 7 minutes. Blinking yellow led of
the display indicates that only CPU’s heating is on, when continuous yellow indicates both CPU and
display is heating.
With start of the unit, the following devices starts also:
- GPS is ready to receive data as soon as the operating system is running. GPS requires signal from
at least 3 satellites for location
- if the optional phone is installed, the search of the network is performed automatically.