Gobo Placement
(see
Specifications
for Gobo Dimensions)
The projector uses D-Size gobos or E-Size gobos with an adapter ring. See the
Specifications for exact dimensions. For max. image size and brightness use the larger
gobos. The recommended gobo image diameter for best focusing is up to 32mm. An
image diameter of up to 40mm is possible with some loss in focusing quality.
For D-Size gobos, remove the E-Size Adapter and leave it out:
•
Unscrew the thumbscrews to remove the front cover with the projection lens.
•
For E-Size gobos, use the screw-in adapter ring. For larger gobos, remove the
adapter ring and use the larger retaining ring.
•
Push the two pins of the gobo retaining ring together and pull out the retaining
ring. Carefully remove the old gobo and replace it with the new gobo.
•
If you have a glass gobo, place the more reflective side towards the light bulb.
•
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
•
Replace the front cover and adjust the focus by screwing the projection lens in or
out.
Sunhope Inc
www.thegobo.com
1-800-905-7080 3
