www.sunheater.com
SYSTEM LAYOUT
(Single Box
)
Required:
• Flathead screwdriver or 5/16" (8 mm) nut driver.
• To install your solar heating system you will require 2 hoses - one that will
reach from the pool equipment to the collector and one that reaches from the
collector back to the pool.
Cool Water
(Feed)
Warm Water
(Return Fitting)
Pool Pump
Elbow Connector
Elbow Connector
Black Rubber Connector Hose
Labels
Filter
White
End
Caps
Feed Hose
Return Hose
White
End
Caps
SYSTEM LAYOUT
(Two Boxes
)
• If collectors are to be mounted on a roof, you must purchase kit SK43
for each collector. For high wind areas you will also need kit SK34 for each
collector. Call your retailer or SPQ Brands at 609-212-0221.
• Slots are provided in each solar collector for mounting. (DO NOT USE SMALL HOLES IN
COLLECTORS FOR MOUNTING - SEE PAGE 3. DOING SO WILL VOID YOUR WARRANTY).
• Maximum of four collectors may be plumbed in series.
• Pitch the collectors slightly toward the end caps for winterizing and draining (1”-2”/25 mm-50 mm).
• Do not add additional mounting hardware other than SPQ Brands factory approved kits.
La
be
l
La
be
l
La
be
l
La
be
l
Summary of Contents for S411
Page 7: ...www sunheater com...
