Sunheat Thermal Wave F15, Repair Manual, Page: 18 / 22

L
How To Replace Flame Effect Light Bulb Sockets
!! Unplug The Heater Before Servicing!!
(Remember That The Edges Of the Metal Are Sharp. Use Caution)
The bulb sockets have to be replaced together. You can gain access to the bulbs sockets 2
ways.
1.) Remove access panel on the back
2.) Remove the Glass, Logs and Fire Screen
Once you have gained access to the sockets, remove the wire connection and bulb. Hold the
base of the bulb socket with one hand while unscrewing the anchor ring.
Run the wire up to the circuit board. The wires will attach to AC-N5 and LAMP on the circuit
board.
Note : These wires are universal and it will not matter which terminal they connect
to.
Anchor Ring
Base of the Bulb Socket