Sunheat SH1500RC BB, Repair Manual, Page: 5 / 25

C
How To Replace The Power Cord
!!Unplug Heater Before Servicing!!
(Remember That the Edges of the Metal Are Sharp. Use Caution)
Remove all of the screws that hold the right & the left side panels on to the heater
.
Remove the
6 remaining screws that hold the rear panel in place. There are 3 located on the top panel and 3
on the bottom portion of the back panel
(SEE PHOTO BELOW FOR SCREW LOCATION
& PANEL IDENTIFICATION).
Remove the power cord retaining grommet using a pair of pliers. Squeeze the cord strain relief
and pull out it from the back.
NOTE: IT IS RECOMMENDED THAT YOU REMOVE THE QUICK CONNECTS FROM
THE HEATER AND DIRECT WIRE TO THE POWER ROUTING BOARD. PLEASE
REFER TO INSTRUCTIONS ON HOW TO ELIMINATE THE QUICK CONNECTS IF YOU
HAVE THEM.
Quick Connect