Sunheat PHTR-LED, Owner'S Manual

Page: 14 / 25

ASSEMBLY INSTRUCTIONS
14
SIGNAL
OFF ON
R G B W
IR Sensor
FLASH
STORBE
FADE
OUTPUT
SMOOTH
Operation Instructions of Controller
1. Specifications:
Working temperature:-20-60
℃
Supply voltage: DC12V
Product size: L62×W35×H23mm Package size: L105×W65×H55mm
Net weight: 50g Gross weight: 70g Output: Three CMOS drain-open
Connecting Mode: Common anode Max Load current: 2 A each color
2.Control Method:
Adopt IR remoter to control the led controller, which has 24 buttons, the function of
each button as the table below:
Bri(Speed up) Brightness-(Speed down)
Off On
Static red Static green Static blue
Static white
Static orange Static pea green
Static dark blue 7 color jumpy change
Static dark yellow
Static cyan Static brown
All fade out & fade in
Static yellow
Static light blue
Static pink
7color fade change
Static straw yellow Static sky blue
Static purple 3 base color jumpy
3.Panel specification and connecting drawing as follows:
POWER
DC12V
4. Warning:
Supply voltage of this product is DC12V never connect to DC24V or AC220V.
Never connect two wires directly in case of short circuit.
Lead wire should be connected correctly according to colors that connecting diagram offers.
Warranty of this product is one year, in this period we guarantee replacement or repairing with
no charge, but exclude the artificial situation of damaged or overload working.
5. Replace the remote control battery:
The remote control for LED light is powered by a Model CR2025 3V battery. if you can't use it to
control the LED light at closer position, its battery may be exhausted. please push and pull out the
battery bracket to replace the battery. Like the instruction at the back of the remote control.
open
push