User Manual
5 Installing Inverter onto Wall
23
Tool
Description
Appearance
Marker
Used to mark the hole positions
Measuring
tape
Used to measure distances during
installation
Safety gloves
To avoid or reduce injury
Utility knife
Used for unpacking or cutting
Wire stripper
Used for cable stripping
Hydraulic
pliers
Used to crimp the OT terminal
Heat gun
Used to heat the heat-shrink tubing
Multimeter
Measurement range:
≥
1100Vdc
Used to measure the voltage
Wrench for
MC4 terminal
Used for fastening and loosening the
MC4 terminal
Allen driver
Specification: M8
Used for AC cable connection
Other auxiliary tools that may be used
5.4
Installing the Inverter
Inverter is installed onto the wall by means of backplate enclosed in the packaging.
If you don’t use the supplied backplate, you may drill holes refer to its dimension
below.
880.0
