Sungrow SG110CX-P2, User Manual

Page: 89 / 126

79
Network Service Provider
Grid Type
SA Power Networks
• TS129-2019: < 10 kW for single-phase
& 30 kW for three-phase
• TS130-2017: > 30 kW & ≤ 200 kW
• TS131-2018: > 200 kW
Horizon Power
• HPC-9DJ-13-0001-2019: ≤ 10 kVA for
single-phase & 30 kVA for three-phase
• HPC-9DJ-13-0002-2019: > 30 kVA &
≤1 MVA
westernpower EDM ＃ 33612889-2019
AusNet Services Basic Micro Embedded Generation:2020
For compliance with AS/NZS 4777.2:2020, please select from Australia A/B/C. Please con-
tact your electricity grid operator for which region to use.
step 6 After finishing the settings, tap TUNR ON DEVICE at the upper right corner and the device
will be initialized. The App will send start instructions and the device will start and operate.
step 7 If the inverter is initialized, the App automatically turns to its home page.
- - End
7.4 Function Overview
The App provides parameter viewing and setting functions, as shown in the following figure.
figure 7-5 App function tree map
7.5 Home page
After login, the home page is as follows:
User Manual 7 iSolarCloud App