User's manual
SUNGOO Mobile Navigation 43.01
- 44 -
Useful functions
3. Tap
the
(Back) button to close the
T
URN
-
BY
-T
URN
L
IST
window.
9.2.2
Removing blocks and using original routes
Section blocks can be removed at anytime.
►
In the
T
URN
-
BY
-T
URN
L
IST
window, tap on Options > Calculate
original route.
9.3
TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary, it can change your route
dynamically in order to avoid a traffic jam, for example.
9.3.1
Displaying traffic messages
The traffic reports that are currently valid are available via the options of
several windows.
1. Tap
on
Options > Traffic.
The
T
RAFFIC
I
NFORMATION
window opens.
Above the list, the Traffic information button shows the type of traffic
messaging listed and how many messages of this type are listed.
2. Tap the Traffic information button to select the messages to be
displayed.
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
►
Tap a message to display detailed information.
The navigation system can Avoid (
) or Ignore (
) obstructions
on the route. The Avoid / Ignore button shows the corresponding status.
►
Tap the button to select the alternative setting.
►
Tap the
(Back) button to close the
T
RAFFIC
I
NFORMATION
window.
9.3.2 TMC
Settings
►
In the
T
RAFFIC
I
NFORMATION
window, tap on Options > TMC
Settings.
In the
TMC
S
ETTINGS
window, you can set and configure the TMC-
sender, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
