2
1.2
Hardware
The
F3_EVO_Brush
flight controller is designed to give awesome flight performance based on tried
and tested sensors while providing unparalleled I/O capabilities in a small and extremely
lightweight form-factor by a next-generation CPU. With all the features needed for the heart of
your aircraft, whether you’re into FPV racing, acrobatic flying or aerial photography, it’s perfect.
Front view
1)
DSM
receiver is soldered to
3.3V
,
GND
, and
RX3
of the DSM port; configure UART3 in
Cleanflight/Betaflight.
2)
PPM
and
SBUS
receivers are soldered to
GND
,
5V
, and
RX2
of the UART2 port; for SBUS signal,
configure UART2 in Cleanflight/Betaflight.
SunFounder