SunFounder 250, Manual

Page: 1 / 12

2/9/2018 SunFounder 250 - Wiki
http://wiki.sunfounder.cc/index.php?title=SunFounder_250 1/12
SunFounder 250
From Wiki
Contents
1 Introduction
2 Feature
3 Components Test Before Assembly
3.1 1. Battery, Balance Charger and Power Adapter Test
3.1.1 Test Operations:
3.1.2 Note:
3.2 2. Battery Indicator Alarm (with Buzzer) Test
3.2.1 Test Operations:
3.3 3. Motors Test
3.3.1 Test Operations (power-off):
3.4 4. ESCs Test
3.4.1 Test Operations (power-on):
3.5 5. Section Board and Power Cord Test
3.5.1 Test Operations:
3.6 6. Flight Controller Board Test
3.6.1 Test Operations:
4 Related links
5 FAQ
Introduction
The realization of FPV flying starts from having a SunFounder 250 aircraft. The SunFounder 250 Quadcopter is tailored for the hobbyists for FPV flying. It
features stability, flexibility and activity. You can realize a stable flight in a high or low altitude or in a forest with the SunFounder 250. The skid landing
damping sponge tubes bound onto the motors help stablize the flight and protect the frame through increasing the buffer between the frame and the land
when the aircraft is landing.
It runs the OpenPilot firmware of the flight controller firmware and the 12A SUNFOUNDER brushless electronic speed controller. This kit is designed to
meet the hobbyists’ higher requirement of flying the aircraft. You can realize a stable flight in a small space or a rapid 3D flight based on your own
configuration and parameter setting.
Note: If the motor and ESC in the kit you received are both carrying SUNFOUNDER logo, then you receive the SF250 V2.0. The assemly procedures are
the same with V1.0 version, please refer to the video below : https://www.sunfounder.com/video/category/?cat=40
Feature