SUNFORD ELECTRONICS APlusBoost Home MultiRoom, Installation Manual

Page: 14 / 23

Light Patterns
12
Panel Indicator
CorrectFunctioning:
•
The band indicator lights on the front panel
indicate the status of each band of the booster.
Every time the power is turned on, all the
indicators will turn green for about 1 second.
This means that the booster has passed the self-
test and is in good condition. When there is no
problem with the system, all the indicators
remain solid green during operation.
Band Indicator Lights Blinking Red:
•
Band has reduced gain. Which lights b linking indicate that the corresponding
booster bands have reduced power due to a feedback loop condition called
oscillation. This is a built in safety feature to prevent harmful interference
with a nearby cell tower. If you are already experiencing the desired signal
boost, then no further adjustments are necessary. If you are not
experiencing the desired boost in coverage then refer to the Troubleshooting
section.
Band Indicator Lights Solid Red:
•
Band has shutoff. This is due to a feedback loop condition called oscillation.
This is a built in safety feature that causes a band to shut off to prevent
harmful interference with a nearby cell tower. Refer to Troubleshooting
section.