background image

User's Manual

4

Your Sunfire Subwoofer should reach

you in perfect condition. If you do notice
any shipping damage, please contact
your Sunfire Dealer immediately.

Gently lift out the unit and remove all

the packing material. It is important to
save all the packing materials and the
box in case your subwoofer ever needs
to be moved or shipped for repair.

Make sure that you keep your sales

receipt. It is the only way to establish the
duration of your Limited Warranty and it
may come in useful for insurance
purposes.

Please take a moment to fill out and

mail the Sunfire Warranty Registration
card. Also read the serial number located
on the control panel and record it here:

Unpacking

Features

1250 watt, high efficiency amplifier

Very low distortion

Long throw, premium quality driver

Extremely compact size

Automatic signal-sensing turn-on
and standby mode

Line level inputs

Speaker-level binding post inputs

Line level high-pass outputs

Flat/Video contour switch

Continuously variable phase
control

Continuously variable crossover
control, 35 Hz to 100 Hz

Continuously variable volume level
control

Soft clipping circuit allows graceful
overload and prevents speaker
damage due to clipping

Gold-plated inputs and outputs

Dear Friend:

Thank you for purchasing my Sunfire

True Subwoofer Architectural. I hope you
enjoy it and the music it makes as much
as I have enjoyed creating it for you.

The big breakthrough features of the

subwoofer are its uncanny tracking
downconverter and its long throw, high
back-electromotive force driver. Taken
together, they provide this subwoofer
with as much bass as you could get from
several 15 inch drivers mounted in a
cabinet the size of a small refrigerator.

Introduction

Serial Number:

Purchased from:

Date:

Care

To maintain the speaker cabinet’s

finish, first unplug the power cord and
then use a soft, slightly dampened cloth
to clean the surfaces and finish off with a
dry cloth.

To keep the large rubber surrounds

soft and supple for 20 years or more,
treat them with MINK OIL, available at
most shoe repair stores. Rub a generous
amount into the surrounds with a soft
cloth about once a year (more often if
you live in a dry climate).

If your Sunfire Subwoofer needs

servicing, please read the Troubleshoot-
ing section on page 17. If a problem still
persists, contact your nearest authorized
Sunfire Dealer.

Summary of Contents for True Subwoofer Architectural





















Reviews: