User's Manual
Cabinet Installation
1. With the help of an assistant to
lift the cabinet, check the fit of the
cabinet into the framing. Use wood
shims if there is any gap between
the cabinet sides and the vertical
studs.
. If it makes it easier, you can con-
nect the wiring to the cabinet before
you secure it in place. See the next
page for details.
3. When you are happy with the fit of
the cabinet, apply wood glue, such
as Liquid Nails™ along the cabinet
sides. Fit the cabinet into the fram-
ing until its front face is flush with
the front face of the framing.
4. Use a level to check that the cabi-
net is vertical.
5. Use six woodscrews (supplied) or
more on each side to secure the
cabinet in place. Do not screw into
any of the joints of the cabinet. The
cabinet walls are 3/4 inch thick, so
make sure the screws do not pass
all the way through. (The supplied
screws will not pass through, if
used with standard 2x4 studs.)
10
Gluing and screwing the
cabinet in place
