1
Assembly Guide
Introduction
Thank you for purchasing this Sun
fi
re loudspeaker
stand. It has been designed as a perfect match
for the CRM-2 satellite loudspeakers – following
the cabinet's taper and producing an elegant,
one-piece look. A high-gloss lacquered base and
column ensures that form meets function. This
guide shows you how to assemble the stand and
mount the CRM-2. Please read the CRM-2 User's
Manual for further details of these loudspeakers,
including location, operation and features. Please
note that the CRM-2 is sold separately.
Assembly overview
The column is attached to the base using four
Allen screws supplied. The CRM-2 loudspeaker
has an adapter plate that lines up with a keyhole
bracket in the column, and the loudspeaker is held
in place by two locking screws. Speaker wires are
neatly hidden within the column and exit from the
base. Four rubber screw-on feet are supplied to
fi
t on the base.
Unpacking
Your stand kit should reach you in perfect condi-
tion. If you do notice any shipping damage, please
contact Sun
fi
re immediately. Make sure that
you keep your sales receipt. It is the only way to
establish the duration of your Limited Warranty.
Contents of each stand kit
• Base
• Column
• Speaker Adapter Plate
• 4 Allen screws for attaching the column to the base
• 1 Allen screw for attaching your CRM-2 satellite loud-
speaker to the speaker adapter plate
• 2 Allen screws for attaching the speaker adapter plate
to the column
• Allen wrench
• 4 screw-on spikes, 4 screw-on rubber feet, with wrench
CRM-2
Column
Base
®
Satellite Loudspeaker Stand Kit
