background image

User's Manual:  Radiant Heater

1-3

WARRANTY INFORMATION

Clean Burn, LLC warrants that it's Radiant Heaters and component parts will be free from defects in material and 

workmanship for a period of 12 months from date of purchase when properly installed, operated, and maintained in 

accordance with the installation and maintenance instructions, safety guides and labels contained with each unit.  If any 

component proves defective in either material or workmanship during the limited warranty period, Clean Burn, LLC, at its 

option, may repair the defective part or equipment or replace the equipment or relevant parts.  Proof of purchase and warranty 

qualification must be established at time of all returns and exchanges.

BILL OF SALE:

  A copy of the bill of sale must be provided at time of return.

CLAIM PROCEDURE:  

All claims are to be submitted to your Sunfire Dealer. 

This limited warranty does not apply to heater, component or replacement part damage resulting from incorrect installation, 

misuse, abuse, accident, act of God, neglect, mishandling, contaminated fuel, modification, incorrect environments, or 

wear from ordinary use.  The warranty set forth above is the exclusive warranty provided by Clean Burn, LLC and all other 

warranties, including any implied warranties or merchantability or fitness for a particular purpose, are expressly disclaimed.  

In the event any implied warranty is not hereby effectively disclaimed due to operation of law, such implied warranty is 

limited in duration to the duration of the applicable warranty stated above. The remedies set forth above are the sole and 

exclusive remedies available hereunder. Clean Burn, LLC will not be liable for any incidental or consequential damages 

directly or indirectly related to the sales, handling or use of the equipment, and in any event Clean Burn, LLC in connection 

with the equipment, including for claims based on negligence or strict liability, is limited to the purchase price.  Some states 

do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.  Some states do 

not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not 

apply to you.

TRADEMARKS 

The Sunfire logo is a trademark of Clean Burn, LLC.  All other brand or product names mentioned are the registered trade-

marks or trademarks of their respective owners.

COPYRIGHT

Copyright © 2016 Clean Burn, LLC.  All rights reserved.  No part of this publication may be reproduced, or distributed 

without the prior written permission of Clean Burn, LLC.  Subject to change without notice. 

Summary of Contents for SF-150























Reviews: