background image

User's Manual

6

The details below show various sys-

tems incorporating the loudspeakers, with 

a subwoofer to handle the low frequency 

range.

Ideally, all of the surround loudspeak-

ers in a home theater system should 

be of the same make and model, and 

positioned at similar heights to produce a 

smooth and continuous soundfield. 

Front Left/Right Speakers 

 The front left and right loudspeak-

ers should be positioned so that your 

TV screen is exactly centered between 

them. This will help focus your attention 

towards the screen. The HRS-SAT4 can 

be wall-mounted on each side of a flat 

panel display, or mounted on the optional 

stands either side of your TV. Alterna-

tively, you can use the HRS-SAT4C wall-

mounted in a vertical orientation.

The left loudspeaker should be set ex-

actly the same distance and angle away 

from your listening position as the right 

loudspeaker.

If you have a smaller TV, the loud-

speakers should be no more than two 

feet away from the sides of the TV. 

If you have a Sunfire or Carver system 

equipped with Sonic Holography, then 

it is recommended that you use a tape 

measure to set the left and right loud-

speakers to be an equal distance away 

from your listening position, within half 

an inch tolerance. (Sonic Holography is a 

unique process designed by Bob Carver 

to enhance the three-dimensional effects 

and realism of stereo sound.)

Center Loudspeaker 

Most movie dialog will come from the 

center loudspeaker, so careful positioning 

is an important part of a good home the-

ater system. Your eyes and ears should 

focus your attention towards the center of 

the screen. 

The center loudspeaker can sit on top, 

or directly underneath the TV, as long 

as it is located on the centerline and 

not off to one side. Use the kickstand to 

adjust the elevation angle so it is pointing 

towards your listening position.

Position the front face of the loud-

speaker close to the front edge of the TV 

cabinet. (The sound waves may other-

wise reflect off the top of the TV cabinet 

and distort the center imaging.)

For flat panel displays, the center loud

-

speaker can be fitted on the walls directly 

Loudspeaker Locations

Center loudspeaker

Center

Front left and right loudspeakers

Left

Right

Sub

TV

Couch

Right

HRS-SAT4

Left

HRS-SAT4

Center HRS-SAT4C

(above or below display)

Wall-mounted display and loudspeakers

Summary of Contents for HRS-SAT-4C

















Reviews: