background image

User's Manual

3

Introduction

Features

Location

Installation

Features

•  Perfectly matched to the HRS 

subwoofers, and the HRS-SAT4 and 

HRS-SAT4C loudspeakers to form a 

complete system

•  HRS-SAT4BIP can be wall-mounted, or 

placed on a cabinet or shelf. They can 

be used for surround, and surround-

back applications

•  Two-way, high pressure design with 

fully-sealed enclosure, offers wide, 

diffuse rear/side channels for an 

enhanced home theater experience

•  4.5" High Back-emf driver 
•  Dual 1" ring radiating tweeters
•  110 dB maximum output
•  00 watts maximum power
•  Magnetic grilles
•  Gold-plated spring terminals

•  High gloss multi-layer cabinet finish

Care

If a loudspeaker needs servicing, 

please read the Troubleshooting section 

on page 11. If a problem persists, please 

contact your nearest authorized Sunfire 

Dealer.

Please take a moment to fill out and 

mail the Sunfire Customer Response 

card. Also read the serial number located 

on the rear label and record it here:

Thank you for purchasing these 

Sunfire High Resolution Series surround 

loudspeakers. We hope you enjoy them 

and the music they make as much as we 

have enjoyed creating them for you.

These loudspeakers follow a great 

heritage of both world-class loudspeaker 

designs and industry-leading subwoofer 

technologies.

The HRS-SAT4BIP surround loud-

speakers are designed as a perfect 

match to our HRS subwoofers, center 

and satellite loudspeakers, resulting in an 

amazing home theater experience... the 

kind of heart-felt experience that could 

only come from Sunfire.

Unpacking

Your Sunfire High Resolution Series 

loudspeakers should reach you in perfect 

condition. If you do notice any shipping 

damage, please contact Sunfire imme

-

diately.

Gently lift out the loudspeakers and 

all the packing material. It is important 

to save all the packing materials and 

the box in case your loudspeakers ever 

needs to be moved or shipped for repair.

Make sure that you keep your sales 

receipt. It is the only way to establish 

the duration of your Limited Warranty 

and it may come in useful for insurance 

purposes.

Introduction

Misc.

Serial Number:  

 

 

Purchased from: 

 

 

     

 

 

 

 

     

 

 

 

 

Date: 

 

 

 

 

 

Summary of Contents for HRS HRS-SAT4BIP













Reviews: